Featured in Western Hotelier Magazine: Five Tips for Choosing Hotel Laundry Equipment

Published On: November 19, 2026

It’s 2 p.m. on a sold-out Saturday. Check-in opens in an hour, the towel shelves are thin and one washer-extractor is waiting on a part. The machine is only part of the story. The rest comes down to how the equipment was sized, installed and supported. 

That idea plays out in “The Laundry Advantage: Why the Right Equipment Partner Matters,” a feature by Karen Barr in the September/October 2026 issue of Western Hotelier magazine. The article looks at what hotels should expect from their hotel laundry equipment and the distributor behind it, from selecting the right machine mix to parts, training and long-term planning. The feature also highlights UniMac® industrial laundry machines and technology designed to offer efficiency and throughput in busy hotel laundry operations.  

Whether you’re replacing aging machines, opening a new property or tired of waiting on parts, these insights can help you make your next equipment decision with confidence. 

 

Five Takeaways to Put to Work in Your Hotel Laundry 

1. Size the equipment mix to your real linen load 

Most capacity problems start on paper. Room counts get the attention, while pool towels, spa robes and banquet linens quietly add pounds every day. Randy Radtke, senior manager of content and creative services at Alliance Laundry Systems, shared with Western Hotelier magazine that it all starts with “pre-planning and right-sizing the equipment mix.” He suggests you be wary of any distributor who leads with one specific machine before asking about your operation. 

Put it to work: Before you request quotes, build a one-page profile of your laundry: daily pounds, peak days, par levels and growth plans. Share it with your distributor, so you can compare recommendations side by side.

 

2. Plan the hotel laundry room around linen flow 

Capacity is only half of the plan. A hotel laundry room laid out so soiled and clean linens follow separate paths can help reduce the risk of cross-contamination and keep your team from doubling back. Matching each industrial washing machine and dryer by capacity helps loads move from wash to dry without a bottleneck. 

Put it to work: Walk the route a soiled cart takes today. Every point where it crosses clean linens is a candidate for a layout fix. For more ideas, see 5 Mistakes You’re Probably Making in Your Hotel’s Laundry Room. 

 

3. Treat installation and training as part of the purchase 

Equipment installed to manufacturer specifications and tested before handover can start its working life on solid footing. After that, results depend on your team, and with staff changes common in housekeeping, training works best as an ongoing habit. Some properties record their distributor training sessions, so new hires can refer back to them. Controls matter too. UniMac UniLinc™ Touch control offers 34 language options, so team members can run cycles in their first language. 

Put it to work: Ask what training is included at the time of installation and what refresher options are available after. 

 

4. Know how parts and support will reach you 

When a machine goes down mid-shift, parts availability becomes a guest experience issue. In the Western Hotelier article, Radtke also describes a one-stop-shop approach, where the partner who sells the equipment helps with replacement parts and maintenance guidance after the sale. Technology can help your team spot issues sooner, too. CORE technology, available on select UniMac equipment, sends service alerts when a machine needs attention. 

Put it to work: Ask which parts are stocked locally, where the nearest warehouse is and what response times look like in your area. Offerings vary by distributor, so get specifics up front. 

 

5. Choose a partner for the long run 

Hotels change. Occupancy shifts, renovations happen and operational needs evolve. Scheduled inspections, cleaning and calibration can help catch small issues before they disrupt linen availability, and a long-term partner can help you decide when it’s time to expand or modernize. As Radtke says, “Anyone can sell you equipment and walk away.” Learn why long-term distributor partnerships matter. 

Put it to work: Ask for a preventive maintenance schedule built around your volume and set a yearly review of capacity against occupancy. 

 

Common Hotel Laundry Equipment Questions Laundry Managers Ask 

Should hotel industrial washing machines be hardmount or softmount? 

It depends on your floor and your space. Hardmount washer-extractors are anchored to a concrete floor. Softmount models use a built-in suspension and need no special foundation, so they can fit upper-floor laundry rooms or spaces where anchoring isn’t practical. Ask your distributor to assess your floor before you choose. 

 

How does extraction speed affect drying time? 

Higher G-force extraction removes more water during the spin. That leaves less moisture for the dryer, which may help shorten dry cycles. That’s why it helps to plan washers and dryers together. Learn more about why G-force matters. 

 

When is it time to replace an industrial washing machine and dryer? 

Watch for these signals: 

  • Repairs coming more often. 
  • Parts that take longer to source. 
  • Cycles that can’t keep up with occupancy. 
  • Controls that make it hard to program or track loads. 

Any one of these is a good reason to ask your distributor for a replacement review. It should compare the cost of continued repairs with the cost of new equipment sized for where your property is headed. 

 

Where can I read “The Laundry Advantage”? 

Find the full feature in the September/October 2026 issue of Western Hotelier magazine, in the Laundry Distributors’ Report & Directory 2026 (pages 73 to 84). Read “The Laundry Advantage” in Western Hotelier. 

 

Find the Right Partner for Your Hotel Laundry Equipment 

Ready to work through the above takeaways and find the right UniMac laundry equipment and technology mix for your operation? 

Categories: Blog, News